Page 282 - Read Online

Duparchy et al. Energy Mater. 2025, 5, 500134 https://dx.doi.org/10.20517/energymater.2025.51 Page 19 of 21

13. Liu, Z.; Shuai, J.; Mao, J.; et al. Effects of antimony content in MgAg 0.97 Sb on output power and energy conversion efficiency. Acta.
x
Mater. 2016, 102, 17-23. DOI
14. Back, S. Y.; Meikle, S.; Mori, T. Comprehensive study of α-MgAgSb: microstructure, carrier transport properties, and thermoelectric
performance under ball milling techniques. J. Mater. Sci. Technol. 2025, 227, 57-66. DOI
15. Imasato, K.; Kang, S. D.; Ohno, S.; Snyder, G. J. Band engineering in Mg Sb by alloying with Mg Bi for enhanced thermoelectric
3 2 3 2
performance. Mater. Horiz. 2018, 5, 59-64. DOI
16. Zhang, J.; Song, L.; Sist, M.; Tolborg, K.; Iversen, B. B. Chemical bonding origin of the unexpected isotropic physical properties in
thermoelectric Mg Sb and related materials. Nat. Commun. 2018, 9, 4716. DOI
2
3
17. Dasgupta, T.; Stiewe, C.; de Boor, J.; Müller, E. Influence of power factor enhancement on the thermoelectric figure of merit in Mg Si
2
Sn based materials. Phys. Status. Solidi. (A). 2014, 211, 1250-4. DOI
0.4 0.6
18. Liu, W.; Zhang, Q.; Yin, K.; et al. High figure of merit and thermoelectric properties of Bi-doped Mg Si Sn solid solutions. J. Solid.
2
0.4
0.6
State. Chem. 2013, 203, 333-9. DOI
19. Leblanc, S.; Yee, S. K.; Scullin, M. L.; Dames, C.; Goodson, K. E. Material and manufacturing cost considerations for thermoelectrics.
Renew. Sustain. Energy. Rev. 2014, 32, 313-27. DOI
20. Gaultois, M. W.; Sparks, T. D.; Borg, C. K. H.; Seshadri, R.; Bonificio, W. D.; Clarke, D. R. Data-driven review of thermoelectric
materials: performance and resource considerations. Chem. Mater. 2013, 25, 2911-20. DOI
21. Liu, X.; Zhu, T.; Wang, H.; et al. Low electron scattering potentials in high performance Mg Si 0.45 Sn 0.55 based thermoelectric solid
2
solutions with band convergence. Adv. Energy. Mater. 2013, 3, 1238-44. DOI
22. Liu, W.; Tan, X.; Yin, K.; et al. Convergence of conduction bands as a means of enhancing thermoelectric performance of n-type Mg 2
Si Sn solid solutions. Phys. Rev. Lett. 2012, 108, 166601. DOI
1-x x
23. Kaibe, H.; Aoyama, I.; Mukoujima, M.; et al. Development of thermoelectric generating stacked modules aiming for 15% of
conversion efficiency. ICT. 2005. 24th. International. Conference. on. Thermoelectrics,. 2005,. pp. 242-7. DOI
24. Camut, J.; Müller, E.; de Boor, J. Analyzing the performance of thermoelectric generators with inhomogeneous legs: coupled material-
device modelling for Mg X-based TEG prototypes. Energies 2023, 16, 3666. DOI
2
25. Wieder, A.; Camut, J.; Duparchy, A.; et al. High-performance tellurium-free thermoelectric module for moderate temperatures using α-
MgAgSb/Mg (Si,Sn). Mater. Today. Energy. 2023, 38, 101420. DOI
2
26. Skomedal, G.; Burkov, A.; Samunin, A.; Haugsrud, R.; Middleton, H. High temperature oxidation of Mg (Si-Sn). Corros. Sci. 2016,
2
111, 325-33. DOI
27. Duparchy, A.; Deshpande, R.; Sankhla, A.; et al. Instability mechanism in thermoelectric Mg (Si,Sn) and the role of Mg diffusion at
2
room temperature. Small. Sci. 2025, 5, 2300298. DOI
28. Kato, D.; Iwasaki, K.; Yoshino, M.; Yamada, T.; Nagasaki, T. Significant effect of Mg-pressure-controlled annealing: non-
stoichiometry and thermoelectric properties of Mg Si Sb . Phys. Chem. Chem. Phys. 2018, 20, 25939-50. DOI PubMed
2-δ
x
1-x
29. Kato, D.; Iwasaki, K. Mg-pressure-controlled annealing for tuning Mg content and thermoelectric properties of Mg (Si Sn ) Sb .
x
0.5 1-x
0.5
2-δ
J. Alloys. Compd. 2021, 856, 157351. DOI
30. Farahi, N.; Stiewe, C.; Truong, D. Y. N.; de Boor, J.; Müller, E. High efficiency Mg (Si,Sn)-based thermoelectric materials: scale-up
2
synthesis, functional homogeneity, and thermal stability. RSC. Adv. 2019, 9, 23021-8. DOI
31. Sankhla, A.; Patil, A.; Kamila, H.; et al. Mechanical alloying of optimized Mg (Si,Sn) solid solutions: understanding phase evolution
2
and tuning synthesis parameters for thermoelectric applications. ACS. Appl. Energy. Mater. 2018, 1, 531-42. DOI
32. Liu, W.; Tang, X.; Li, H.; Sharp, J.; Zhou, X.; Uher, C. Optimized thermoelectric properties of Sb-doped Mg Si Sn Sb through
2(1+Z) 0.5-y 0.5 y
adjustment of the Mg content. Chem. Mater. 2011, 23, 5256-63. DOI
33. Macario, L. R.; Cheng, X.; Ramirez, D.; Mori, T.; Kleinke, H. Thermoelectric properties of Bi-doped magnesium silicide stannides.
ACS. Appl. Mater. Interfaces. 2018, 10, 40585-91. DOI PubMed
34. Sankhla, A.; Kamila, H.; Naithani, H.; Mueller, E.; de Boor, J. On the role of Mg content in Mg (Si,Sn): assessing its impact on
2
electronic transport and estimating the phase width by in situ characterization and modelling. Mater. Today. Phys. 2021, 21, 100471.
DOI
35. Ghosh, S.; Abdelbaky, M.; Mertin, W.; Müller, E.; de Boor, J. Surface degradation of Mg X-based composites at room temperature:
2
assessing grain boundary and bulk diffusion using atomic force microscopy and scanning electron microscopy. ACS. Appl. Mater.
Interfaces. 2024, 16, 48619-28. DOI PubMed PMC
36. Sankhla, A. Unraveling the interplay between composition, electronic band structure and electronic transport properties in n-type Mg
2
X (X: Si, Sn) materials. Ph.D. Dissertation, Justus Liebig University Giessen, Giessen, 2024. https://jlupub.ub.uni-giessen.de/items/
f291cf47-c09c-4c5d-b7c3-864e7a58abd0 (accessed 2025-06-05).
37. Liu, Z.; Geng, H.; Mao, J.; et al. Understanding and manipulating the intrinsic point defect in α-MgAgSb for higher thermoelectric
performance. J. Mater. Chem. A. 2016, 4, 16834-40. DOI
38. Ryu, B.; Choi, E.; Park, S.; et al. Native point defects and low p-doping efficiency in Mg (Si,Sn) solid solutions: a hybrid-density
2
functional study. J. Alloys. Compd. 2021, 853, 157145. DOI
39. Wood, M.; Kuo, J. J.; Imasato, K.; Snyder, G. J. Improvement of low-temperature zT in a Mg Sb -Mg Bi solid solution via Mg-vapor
3 2 3 2
annealing. Adv. Mater. 2019, 31, e1902337. DOI
40. Imasato, K.; Wood, M.; Anand, S.; Kuo, J. J.; Snyder, G. J. Understanding the high thermoelectric performance of Mg Sb -Mg Bi
3 2 3 2
alloys. Adv. Energy. Sustain. Res. 2022, 3, 2100208. DOI