Page 26 - Read Online

Li et al. J Mater Inf 2024;4:27 https://dx.doi.org/10.20517/jmi.2024.44 Page 19 of 20

and RMSE in regression analysis evaluation. PeerJ Comput Sci 2021;7:e623. DOI PubMed PMC
37. Liu W, Wang C, Liang C, et al. Optimal design of γ’-strengthened high-entropy alloys via machine learning multilayer structural
model. Mater Sci Eng A 2023;871:144852. DOI
38. Gholamy A, Kreinovich V, Kosheleva O. Why 70/30 or 80/20 relation between training and testing sets: a pedagogical explanation. Int
J Intell Technol Appl Stat 2018;11:105-11. DOI
39. Rojas D, Garcia J, Prat O, et al. Effect of processing parameters on the evolution of dislocation density and sub-grain size of a 12%Cr
heat resistant steel during creep at 650°C. Mater Sci Eng A 2011;528:1372-81. DOI
40. Pešička J, Kužel R, Dronhofer A, Eggeler G. The evolution of dislocation density during heat treatment and creep of tempered
martensite ferritic steels. Acta Mater 2003;51:4847-62. DOI
41. Moon J, Lee C, Lee T, Jang M, Park M, Han HN. Phase transformation and impact properties in the experimentally simulated weld
heat-affected zone of a reduced activation ferritic/martensitic steel. J Nucl Mater 2014;455:81-5. DOI
42. Yang L, Zhao F, Ding W. Laves phase evolution in china low-activation martensitic (CLAM) steel during long-term aging at 550 °C.
Materials 2019;13:154. DOI PubMed PMC
43. Zhang X, Wu X, Liu R, Liu J, Yao M. Influence of Laves phase on creep strength of modified 9Cr-1Mo steel. Mater Sci Eng A
2017;706:279-86. DOI
44. Jiang L, Wang C, Fu H, Shen J, Zhang Z, Xie J. Discovery of aluminum alloys with ultra-strength and high-toughness via a property-
oriented design strategy. J Mater Sci Technol 2022;98:33-43. DOI
45. Chen S, Rong L. Effect of silicon on the microstructure and mechanical properties of reduced activation ferritic/martensitic steel. J
Nucl Mater 2015;459:13-9. DOI
46. Kim HK, Lee JW, Moon J, Lee CH, Hong HU. Effects of Ti and Ta addition on microstructure stability and tensile properties of
reduced activation ferritic/martensitic steel for nuclear fusion reactors. J Nucl Mater 2018;500:327-36. DOI
47. Choi J, Moon J, Kim BH, et al. Tensile and Charpy impact properties of reduced activation ferritic/martensitic steel with small
amounts of Ta and Ti. J Nucl Mater 2020;528:151862. DOI
48. Zhou J, Shen Y, Hong Y, Xue W, Misra R. Strengthening a fine-grained low activation martensitic steel by nanosized carbides. Mater
Sci Eng A 2020;769:138471. DOI
49. Tan L, Yang Y, Busby J. Effects of alloying elements and thermomechanical treatment on 9Cr reduced activation ferritic–martensitic
(RAFM) steels. J Nucl Mater 2013;442:S13-7. DOI
50. Terentyev D, Puype A, Kachko O, Van Renterghem W, Henry J. Development of RAFM steel for nuclear applications with reduced
manganese, silicon and carbon content. Nucl Mater Energy 2021;29:101070. DOI
51. Huang Q. Status and improvement of CLAM for nuclear application. Nucl Fusion 2017;57:086042. DOI
52. Kasada R, Ono H, Sakesegawa H, Hirose T, Kimura A, Kohyama A. Mechanical properties of JLF-1 reduced-activation ferritic steels.
Fusion Sci Technol 2003;44:145-9. DOI
53. Sakasegawa H, Tanigawa H. Mechanical properties of F82H plates with different thicknesses. Fusion Eng Design 2016;109-11:1724-
7. DOI
54. Mao C, Liu C, Yu L, Li H, Liu Y. The correlation among microstructural parameter and dynamic strain aging (DSA) in influencing the
mechanical properties of a reduced activated ferritic-martensitic (RAFM) steel. Mater Sci Eng A 2019;739:90-8. DOI
55. Taylor GI. The mechanism of plastic deformation of crystals. Part I. - Theoretical. Proc R Soc Lond A 1934;145:362-87. DOI
56. Lucas G. The evolution of mechanical property change in irradiated austenitic stainless steels. J Nucl Mater 1993;206:287-305. DOI
57. Cho KS, Park SS, Choi DH, Kwon H. Influence of Ti addition on the microstructure and mechanical properties of a 5% Cr–Mo–V
steel. J Alloys Compd 2015;626:314-22. DOI
58. Li Y, Huang Q, Wu Y, Nagasaka T, Muroga T. Mechanical properties and microstructures of China low activation martensitic steel
compared with JLF-1. J Nucl Mater 2007;367-70:117-21. DOI
59. Susila P, Sturm D, Heilmaier M, Murty B, Subramanya Sarma V. Effect of yttria particle size on the microstructure and compression
creep properties of nanostructured oxide dispersion strengthened ferritic (Fe–12Cr–2W–0.5Y O ) alloy. Mater Sci Eng A
2 3
2011;528:4579-84. DOI
60. Ramar A, Schäublin R. Analysis of hardening limits of oxide dispersion strengthened steel. J Nucl Mater 2013;432:323-33. DOI
61. Tavassoli A, Rensman J, Schirra M, Shiba K. Materials design data for reduced activation martensitic steel type F82H. Fusion Eng
Des 2002;61-2:617-28. DOI
62. Tan L, Busby J. Formulating the strength factor α for improved predictability of radiation hardening. J Nucl Mater 2015;465:724-30.
DOI
63. Dethloff C, Gaganidze E, Aktaa J. Quantitative TEM analysis of precipitation and grain boundary segregation in neutron irradiated
EUROFER 97. J Nucl Mater 2014;454:323-31. DOI
64. Klueh R, Alexander D, Sokolov M. Effect of rhenium and osmium on mechanical properties of a 9Cr–2W–0.25V–0.07Ta–0.1C steel.
J Nucl Mater 2000;279:91-9. DOI
65. Tong Z, Dai Y. The microstructure and tensile properties of ferritic/martensitic steels T91, Eurofer-97 and F82H irradiated up to 20dpa
in STIP-III. J Nucl Mater 2010;398:43-8. DOI
66. Tanigawa H, Shiba K, Sakasegawa H, Hirose T, Jitsukawa S. Technical issues related to the development of reduced-activation
ferritic/martensitic steels as structural materials for a fusion blanket system. Fusion Eng Des 2011;86:2549-52. DOI
67. Vivas J, De-Castro D, Altstadt E, Houska M, San-Martín D, Capdevila C. Design and high temperature behavior of novel heat resistant