Page 113 - Read Online
P. 113
Page 38 of 45 Mooraj et al. J Mater Inf 2023;3:4 https://dx.doi.org/10.20517/jmi.2022.41
Ethical approval and consent to participate
Not applicable.
Consent for publication
Not applicable.
Copyright
© The Author(s) 2023.
REFERENCES
1. Oh HS, Kim SJ, Odbadrakh K, et al. Engineering atomic-level complexity in high-entropy and complex concentrated alloys. Nat
Commun 2019;10:2090. DOI PubMed PMC
2. Cantor B. Multicomponent and high entropy alloys. Entropy 2014;16:4749. DOI
3. Cantor B, Chang I, Knight P, Vincent A. Microstructural development in equiatomic multicomponent alloys. Mater Sci Eng A
2004;375-377:213-8. DOI
4. Yeh J, Chen S, Lin S, et al. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and
outcomes. Adv Eng Mater 2004;6:299-303. DOI
5. George EP, Raabe D, Ritchie RO. High-entropy alloys. Nat Rev Mater 2019;4:515-34. DOI
6. Wu Q, Wang Z, Hu X, et al. Uncovering the eutectics design by machine learning in the Al-Co-Cr-Fe-Ni high entropy system. Acta
Mater 2020;182:278-86. DOI
7. Chanda B, Verma A, Das J. Nano-/ultrafine eutectic in CoCrFeNi(Nb/Ta) high-entropy alloys. Trans Indian Inst Met 2018;71:2717-
23. DOI
8. Zhang H, Liu P, Hou J, Qiao J, Wu Y. Prediction of strength and ductility in partially recrystallized CoCrFeNiTi high-entropy alloy.
0.2
Entropy 2019;21:389. DOI PubMed PMC
9. Zhou K, Li J, Wang L, Yang H, Wang Z, Wang J. Direct laser deposited bulk CoCrFeNiNb high entropy alloys. Intermetallics
x
2019;114:106592. DOI
10. Poletti MG, Fiore G, Gili F, Mangherini D, Battezzati L. Development of a new high entropy alloy for wear resistance:
FeCoCrNiW and FeCoCrNiW + 5 at.% of C. Mater Design 2017;115:247-54. DOI
0.3 0.3
11. Xiao J, Tan H, Chen J, Martini A, Zhang C. Effect of carbon content on microstructure, hardness and wear resistance of
CoCrFeMnNiC high-entropy alloys. J Alloys Compd 2020;847:156533. DOI
x
12. Cui Y, Shen J, Manladan SM, Geng K, Hu S. Wear resistance of FeCoCrNiMnAl high-entropy alloy coatings at high temperature.
x
Appl Surf Sci 2020;512:145736. DOI
13. Shi Y, Yang B, Liaw P. Corrosion-resistant high-entropy alloys: a review. Metals 2017;7:43. DOI
14. Li R, Xie L, Wang WY, Liaw PK, Zhang Y. High-throughput calculations for high-entropy alloys: a brief review. Front Mater
2020;7:290. DOI
15. Yin Y, Chen Z, Mo N, et al. High-temperature age-hardening of a novel cost-effective Fe Ni Cr Mo high entropy alloy. Mater Sci
45 25 25 5
Eng A 2020;788:139580. DOI
16. Ma Y, Wu S, Jia Y, et al. Hexagonal closed-packed precipitation enhancement in a NbTiHfZr refractory high-entropy alloy. Metals
2019;9:485. DOI
17. Liu Z, Zhao D, Wang P, et al. Additive manufacturing of metals: microstructure evolution and multistage control. J Mater Sci
Technol 2022;100:224-36. DOI
18. Fu C, Li J, Bai J, et al. Effect of helium bubbles on irradiation hardening of additive manufacturing 316L stainless steel under high
temperature He ions irradiation. J Nucl Mater 2021;550:152948. DOI
19. Farshidianfar MH, Khajepour A, Gerlich A. Real-time control of microstructure in laser additive manufacturing. Int J Adv Manuf
Technol 2016;82:1173-86. DOI
20. Shamsaei N, Yadollahi A, Bian L, Thompson SM. An overview of Direct Laser Deposition for additive manufacturing; Part II:
mechanical behavior, process parameter optimization and control. Addit Manuf 2015;8:12-35. DOI
21. Derimow N, Clark T, Abbaschian R. Solidification processing and cooling rate effects on hexagonal Co Cr Cu Mn Ti high-
22 18 20 16 24
entropy alloys. Mater Chem Phys 2020;240:122188. DOI
22. Xu X, Guo S, Nieh T, Liu C, Hirata A, Chen M. Effects of mixing enthalpy and cooling rate on phase formation of Al CoCrCuFeNi
x
high-entropy alloys. Materialia 2019;6:100292. DOI
23. Kube SA, Schroers J. Metastability in high entropy alloys. Scr Mater 2020;186:392-400. DOI
24. Braeckman B, Boydens F, Hidalgo H, et al. High entropy alloy thin films deposited by magnetron sputtering of powder targets. Thin
Solid Films 2015;580:71-6. DOI
25. Al Hasan NM, Hou H, Sarkar S, et al. Combinatorial synthesis and high-throughput characterization of microstructure and phase
transformation in Ni-Ti-Cu-V quaternary thin-film library. Engineering 2020;6:637-43. DOI
26. Liu X, Zou P, Song L, et al. Combinatorial high-throughput methods for designing hydrogen evolution reaction catalysts. ACS Catal