Page 180 - Read Online

Martin-Gonzalez et al. Energy Mater. 2025, 5, 500121 https://dx.doi.org/10.20517/energymater.2025.32 Page 35 of 35

devices. Microelectron. Eng. 2018, 187-8, 66-77. DOI
300. Mamur, H.; Üstüner, M. A.; Bhuiyan, M. R. A. Future perspective and current situation of maximum power point tracking methods in
thermoelectric generators. Sustain. Energy. Technol. Assessments. 2022, 50, 101824. DOI
301. Cai, Y.; Ding, N.; Rezania, A.; Deng, F.; Rosendahl, L.; Chen, J. A multi-objective optimization in system level for thermoelectric
generation system. Energy 2023, 281, 128194. DOI
302. Su, Y.; Ding, Y.; Xiao, L.; et al. An ultra-deep TSV technique enabled by the dual catalysis-based electroless plating of combined
barrier and seed layers. Microsyst. Nanoeng. 2024, 10, 76. DOI PubMed PMC
303. Hao, F.; Qiu, P.; Tang, Y.; et al. High efficiency Bi Te -based materials and devices for thermoelectric power generation between 100
2 3
and 300 °C. Energy. Environ. Sci. 2016, 9, 3120-7. DOI
304. Deng, T.; Gao, Z.; Li, Z.; et al. Room-temperature exceptional plasticity in defective Bi Te -based bulk thermoelectric crystals.
2
3
Science 2024, 386, 1112-7. DOI
305. Nozariasbmarz, A.; Poudel, B.; Li, W.; Kang, H. B.; Zhu, H.; Priya, S. Bismuth telluride thermoelectrics with 8% module efficiency
for waste heat recovery application. iScience 2020, 23, 101340. DOI PubMed PMC
306. Mason, L. S. Realistic specific power expectations for advanced radioisotope power systems. J. Propuls. Power. 2007, 23, 1075-9.
DOI
307. Sauerschnig, P.; Jood, P.; Ohta, M. Challenges and progress in contact development for PbTe-based thermoelectrics. ChemNanoMat
2023, 9, e202200560. DOI
308. Bu, Z.; Zhang, X.; Hu, Y.; et al. An over 10% module efficiency obtained using non-Bi Te thermoelectric materials for recovering
2 3
heat of < 600 K. Energy. Environ. Sci. 2021, 14, 6506-13. DOI
309. Zhu, Q.; Song, S.; Zhu, H.; Ren, Z. Realizing high conversion efficiency of Mg Sb -based thermoelectric materials. J. Power.
3
2
Sources. 2019, 414, 393-400. DOI
310. Bu, Z.; Zhang, X.; Shan, B.; et al. Realizing a 14% single-leg thermoelectric efficiency in GeTe alloys. Sci. Adv. 2021, 7, eabf2738.
DOI PubMed PMC
311. Jiang, B.; Wang, W.; Liu, S.; et al. High figure-of-merit and power generation in high-entropy GeTe-based thermoelectrics. Science
2022, 377, 208-13. DOI
312. Xie, L.; Ming, C.; Song, Q.; et al. Lead-free and scalable GeTe-based thermoelectric module with an efficiency of 12%. Sci. Adv.
2023, 9, eadg7919. DOI PubMed PMC
313. Liu, Z.; Sato, N.; Gao, W.; et al. Demonstration of ultrahigh thermoelectric efficiency of ~7.3% in Mg Sb /MgAgSb module for low-
2
3
temperature energy harvesting. Joule 2021, 5, 1196-208. DOI
314. Zhang, J.; Song, L.; Iversen, B. B. Insights into the design of thermoelectric Mg Sb and its analogs by combining theory and
3 2
experiment. NPJ. Comput. Mater. 2019, 5, 215. DOI
315. Jood, P.; Ohta, M.; Yamamoto, A.; Kanatzidis, M. G. Excessively doped PbTe with Ge-induced nanostructures enables high-
efficiency thermoelectric modules. Joule 2018, 2, 1339-55. DOI
316. Yu, J.; Xing, Y.; Hu, C.; et al. Half-heusler thermoelectric module with high conversion efficiency and high power density. Adv.
Energy. Mater. 2020, 10, 2000888. DOI
317. Yu, J.; Fu, C.; Liu, Y.; et al. Unique role of refractory Ta alloying in enhancing the figure of merit of NbFeSb thermoelectric
materials. Adv. Energy. Mater. 2018, 8, 1701313. DOI
318. Li, W.; Poudel, B.; Kishore, R. A.; et al. Toward high conversion efficiency of thermoelectric modules through synergistical
optimization of layered materials. Adv. Mater. 2023, 35, e2210407. DOI
319. Nozariasbmarz, A.; Saparamadu, U.; Li, W.; et al. High-performance half-Heusler thermoelectric devices through direct bonding
technique. J. Power. Sources. 2021, 493, 229695. DOI
320. Mejri, M.; Romanjek, K.; Mouko, H. I.; et al. Reliability investigation of silicide-based thermoelectric modules. ACS. Appl. Mater.
Interfaces. 2024, 16, 8006-15. DOI
321. Big-alabo, A. Performance evaluation of Ge/SiGe-based thermoelectric generator. Phys. E. 2019, 108, 202-5. DOI
322. Xia, G. M. Interdiffusion in group IV semiconductor material systems: applications, research methods and discoveries. Sci. Bull.
2019, 64, 1436-55. DOI PubMed
323. Schock, A.; Sankarankandath, V.; Shirbacheh, M. Requirements and designs for mars rover RTGs. In Proceedings of the 24th
Intersociety Energy Conversion Engineering Conference; 1989, pp. 2681-91. DOI
324. Geffroy, C.; Lilley, D.; Parez, P. S.; Prasher, R. Techno-economic analysis of waste-heat conversion. Joule 2021, 5, 3080-96. DOI
325. Leblanc, S.; Yee, S. K.; Scullin, M. L.; Dames, C.; Goodson, K. E. Material and manufacturing cost considerations for
thermoelectrics. Renew. Sustain. Energy. Rev. 2014, 32, 313-27. DOI
326. Thermoelectric materials, devices and systems: technology assessment. 2015. Available from: https://www.energy.gov/sites/prod/
files/2015/02/f19/QTR%20Ch8%20-%20Thermoelectic%20Materials%20TA%20Feb-13-2015.pdf [Last accessed on 5 Jun 2025].
327. Zante, G.; Daskalopoulou, E.; Elgar, C. E.; et al. Targeted recovery of metals from thermoelectric generators (TEGs) using chloride
brines and ultrasound. RSC. Sustain. 2023, 1, 1025-34. DOI
328. Halli, P.; Wilson, B. P.; Hailemariam, T.; Latostenmaa, P.; Yliniemi, K.; Lundström, M. Electrochemical recovery of tellurium from
metallurgical industrial waste. J. Appl. Electrochem. 2020, 50, 1-14. DOI