<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE article PUBLIC "-//NLM//DTD JATS (Z39.96) Journal Publishing DTD v1.0 20120330//EN" "http://jats.nlm.nih.gov/publishing/1.0/JATS-journalpublishing1.dtd">
<article xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink" dtd-version="1.0" article-type="other">
  <front>
    <journal-meta>
      <journal-id journal-id-type="nlm-ta">Iontronics</journal-id>
      <journal-id journal-id-type="publisher-id">ions</journal-id>
      <journal-title-group>
        <journal-title>Iontronics</journal-title>
      </journal-title-group>
      <issn pub-type="epub">3070-6483</issn>
      <publisher>
        <publisher-name>OAE Publishing Inc.</publisher-name>
      </publisher>
    </journal-meta>
    <article-meta>
      <article-id pub-id-type="doi">10.20517/iontronics.2026.34</article-id>
      <article-id pub-id-type="publisher-id">IONS-2026-34</article-id>
      <article-categories>
        <subj-group>
          <subject>Perspective</subject>
        </subj-group>
      </article-categories>
      <title-group>
        <article-title>Beyond electronics: classifying functional materials through electron-ion coupling</article-title>
      </title-group>
      <contrib-group>
        <contrib contrib-type="author" corresp="yes">
          <name>
            <surname>Zhu</surname>
            <given-names>Bin</given-names>
          </name>
          <xref ref-type="aff" rid="I1">
            <sup>1</sup>
          </xref>
          <xref ref-type="aff" rid="I2">
            <sup>2</sup>
          </xref>
          <xref ref-type="corresp" rid="cor1">*</xref>
        </contrib>
      </contrib-group>
      <aff id="I1"><sup>1</sup>Key Laboratory of Polyoxometalate and Reticular Material Chemistry of Ministry of Education, Northeast Normal University, Changchun 130024, Jilin, China.</aff>
      <aff id="I2"><sup>2</sup>Department of Chemical Engineering, Loughborough University, Loughborough, Leicestershire LE11 3TU, UK.</aff>
      <author-notes>
        <corresp id="cor1"><sup id="I1042">*</sup>Correspondence to: Prof. Bin Zhu, Key Laboratory of Polyoxometalate and Reticular Material Chemistry of Ministry of Education, Northeast Normal University, Changchun 130024, Jilin, China; Department of Chemical Engineering, Loughborough University, Loughborough, Leicestershire LE11 3TU, UK. E-mail: <email>b.zhu@lboro.ac.uk</email></corresp>
        <fn fn-type="other">
          <p><bold>Received:</bold> 13 Aug 2026 | <bold>First Decision:</bold> 26 Aug 2026 | <bold>Revised:</bold> 20 Sep 2026 | <bold>Accepted:</bold> 24 Sep 2026 | <bold>Published:</bold> 20 Nov 2026</p>
        </fn>
      </author-notes>
      <pub-date pub-type="ppub">
        <year>2026</year>
      </pub-date>
      <pub-date pub-type="epub">
        <day>20</day>
        <month>11</month>
        <year>2026</year>
      </pub-date>
      <volume>2</volume>
	  <issue>4</issue>
      <elocation-id>37</elocation-id>
      <permissions>
        <copyright-statement>© The Author(s) 2026.</copyright-statement>
        <license xlink:href="https://creativecommons.org/licenses/by/4.0/">
          <license-p>© The Author(s) 2026.<bold>Open Access</bold>This article is licensed under a Creative Commons Attribution 4.0 International License (<uri xlink:href="https://creativecommons.org/licenses/by/4.0/">https://creativecommons.org/licenses/by/4.0/</uri>), which permits unrestricted use, sharing, adaptation, distribution and reproduction in any medium or format, for any purpose, even commercially, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.</license-p>
        </license>
      </permissions>
    </article-meta>
  </front>
  <body>
    <sec id="sec1">
      <title>BEYOND THE ELECTRONIC-MATERIAL PARADIGM</title>
      <p>Materials classification grew up with solid-state physics and electronics. Its most familiar categories: metals, semiconductors and insulators, are defined by electronic structure, while dielectrics, ferroelectrics, magnetic materials, piezoelectrics and topological materials are distinguished by the electronic or field responses to their function<sup>[<xref ref-type="bibr" rid="B1">1</xref>,<xref ref-type="bibr" rid="B2">2</xref>]</sup>. That language remains indispensable, but in which electrons were usually treated as the principal active carriers and the ions of the lattice as a comparatively fixed background.</p>
      <p>This material language system is increasingly difficult to maintain. In many functional materials, ions and ionic defects are mobile on experimental time scales and participate directly in switching, transport, polarization, redox chemistry and interfacial reconstruction. Oxygen vacancies can reshape a conduction path; inserted ions can change carrier density; protonation can alter local bonding; strain can move ionic sublattices and generate polarization fields. The reverse influence is equally important: band alignment, charge redistribution, local electric fields and electronic occupation can change defect charge states, migration energies and ionic populations. In such systems, the electronic and ionic problems are not simply adjacent. They are coupled.</p>
      <p>This limitation has become increasingly evident with the emergence of Iontronics and Semiconductor-Ionics, two frontier directions in which ionic and electronic degrees of freedom are functionally coupled rather than merely coexisting. Iontronics exploits ionic motion, redistribution and polarization to regulate electronic states and functions<sup>[<xref ref-type="bibr" rid="B3">3</xref>]</sup>, whereas Semiconductor-Ionics uses electronic states, band alignment, polarization and local fields to regulate ionic states and transport<sup>[<xref ref-type="bibr" rid="B4">4</xref>]</sup>. These reciprocal but complementary relationships suggest that electron-ion coupling itself should be treated as a classification variable.</p>
      <p>Here we use electron-ion coupling as an additional organizing principle. We first ask where the coupling comes from [<xref ref-type="fig" rid="fig1">Figure 1</xref>], then which side of the coupled system exerts the dominant observable effect [<xref ref-type="fig" rid="fig2">Figure 2</xref>], and finally how the physics changes as coupling becomes stronger [<xref ref-type="fig" rid="fig3">Figure 3</xref>]. The purpose is not to replace established classification system, but to extend them for new functions from advanced materials. Since in extsing classifications electrons, ions, defects, polarization and interfaces cannot always be optimized independently.</p>
      <fig id="fig1" position="float">
        <label>Figure 1</label>
        <caption>
          <p>Origin of reciprocal electron-ion interaction in functional materials. Electronic and ionic states coexist within a shared lattice, defect, polarization, strain, interface and local-field landscape. These common variables permit reciprocal cross-effects even when one direction dominates a measured function. MIEC provides a boundary condition: it denotes coexisting ionic and electronic conduction, whereas Iontronics and Semiconductor-Ionics classify functional cross-effects between the two subsystems. EF: Fermi level / Fermi energy; DOS: density of states; CB: conduction band; VB: valence band; MIEC: mixed ion and electron conductor.</p>
        </caption>
        <graphic xlink:href="iontronics2034.fig.1.jpg"/>
      </fig>
      <fig id="fig2" position="float">
        <label>Figure 2</label>
        <caption>
          <p>Classification of functional materials by the dominant direction of electron-ion effects. The iontronic branch denotes ion-to-electron cross-effects and the Semiconductor-Ionics branch electron-to-ion cross-effects. Piezotronics is represented by strain-induced ionic/lattice displacement and piezopotential modulation of electronic barriers/current. The topological column distinguishes electronic band topology, ionically controlled electronic topology (Topotronics), and real-space topology/connectivity of ion-active pathways (Topoionics). DOS: Density of states; EF: Fermi level / Fermi energy.</p>
        </caption>
        <graphic xlink:href="iontronics2034.fig.2.jpg"/>
      </fig>
      <fig id="fig3" position="float">
        <label>Figure 3</label>
        <caption>
          <p>Proposed grades of electron-ion coupling. The framework progresses from approximately separable electronic and ionic behavior to measurable cross-effects, directional functional coupling, strong reciprocal/correlated coupling, and a prospective state-selective frontier. MIEC represents mixed carrier transport, whereas higher grades describe increasing functional interaction between the electronic and ionic subsystems. The right-hand R(E) profiles schematically indicate increasing state selectivity from broad to resonant transport. PCET: Proton-coupled electron transfer; MIEC: mixed ion and electron conductor; CB: conduction band; VB: valence band; EF: Fermi level / Fermi energy.</p>
        </caption>
        <graphic xlink:href="iontronics2034.fig.3.jpg"/>
      </fig>
    </sec>
    <sec id="sec2">
      <title>WHERE ELECTRON-ION COUPLING COMES FROM</title>
      <p>The usual separation between electrons and ions has a practical origin. Electrons are light and fast, and their transport is naturally expressed in terms of bands, carrier statistics and electronic states. Ionic motion is slower and is commonly described through defects, migration barriers and activated diffusion. These are different descriptions of different degrees of freedom, but they act within the same solid.</p>
      <p>The coupling appears whenever a change in ionic configuration alters the electronic energy landscape, or when a change in electronic state alters the energy landscape seen by an ion. Defect chemistry is one route; polarization and space-charge fields are another. Strain changes orbital overlap and, at the same time, the geometry of an ionic pathway. Interfaces can combine band bending, defect segregation, polarization and chemical reconstruction within the same nanoscale region.</p>
      <p>For classification purposes, if an ionic variable X<sub>i</sub>, such as concentration, displacement, defect occupation or chemical potential, changes an electronic response Y<sub>e</sub>, the dominant cross-effect is X<sub>i</sub> > Y<sub>e</sub>. Conversely, if an electronic variable X<sub>e</sub>, such as carrier density, Fermi-level position, band alignment, polarization or local electronic field, changes an ionic response Y<sub>i</sub>, the dominant cross-effect is X<sub>e</sub> > Y<sub>i</sub>.</p>
      <p>To make these reciprocal responses experimentally usable, X<sub>i</sub>, Y<sub>e</sub>, X<sub>e</sub> and Y<sub>i</sub> are defined by measurable quantities in <xref ref-type="table" rid="t1">Table 1</xref>. Each response should be reported over a stated perturbation interval with uncertainty and appropriate controls, so that electrostatic charging, contact changes, Joule heating or photothermal effects are not mistaken for electron-ion coupling.</p>
       <table-wrap id="t1">
          <label>Table 1</label>
          <caption>
            <p>Experimental meaning of reciprocal-response variables</p>
          </caption>
          <table frame="hsides" rules="groups">
            <thead>
              <tr>
                <td style="border-bottom:1;">
                  <bold>Symbol</bold>
                </td>
                <td style="border-bottom:1;">
                  <bold>Meaning</bold>
                </td>
                <td style="border-bottom:1;">
                  <bold>Representative experimental quantities</bold>
                </td>
                <td style="border-bottom:1;">
                  <bold>Ref.</bold>
                </td>
              </tr>
            </thead>
            <tbody>
              <tr>
                <td>X<sub>i</sub></td>
                <td>Ionic control variable</td>
                <td>ion concentration; vacancy/interstitial occupancy; ionic chemical potential; sublattice displacement</td>
                <td>[<xref ref-type="bibr" rid="B4">4</xref>-<xref ref-type="bibr" rid="B7">7</xref>]</td>
              </tr>
              <tr>
                <td>Y<sub>e</sub></td>
                <td>Electronic response</td>
                <td>current/conductivity; carrier density; barrier height; magnetization; Hall response</td>
                <td>[<xref ref-type="bibr" rid="B3">3</xref>,<xref ref-type="bibr" rid="B8">8</xref>-<xref ref-type="bibr" rid="B12">12</xref>]</td>
              </tr>
              <tr>
                <td>X<sub>e</sub></td>
                <td>Electronic control variable</td>
                <td>Fermi level; carrier density; band alignment; polarization/local electronic field</td>
                <td>[<xref ref-type="bibr" rid="B1">1</xref>,<xref ref-type="bibr" rid="B2">2</xref>,<xref ref-type="bibr" rid="B4">4</xref>,<xref ref-type="bibr" rid="B9">9</xref>]</td>
              </tr>
              <tr>
                <td>Y<sub>i</sub></td>
                <td>Ionic response</td>
                <td>ionic conductivity/flux; diffusion coefficient; defect population; migration barrier</td>
                <td>[<xref ref-type="bibr" rid="B4">4</xref>,<xref ref-type="bibr" rid="B5">5</xref>,<xref ref-type="bibr" rid="B8">8</xref>,<xref ref-type="bibr" rid="B9">9</xref>]</td>
              </tr>
            </tbody>
          </table>
        </table-wrap>
    </sec>
    <sec id="sec3">
      <title>FROM CLASSICAL FUNCTIONALITIES TO COUPLED-MATERIAL CLASSES</title>
      <p>Let us consider which side of the coupled system is being modified. <xref ref-type="fig" rid="fig2">Figure 2</xref> classifies coupled functionality by the dominant cross-response. The distinction is not just between ‘electronic’ and ‘ionic’ materials in an absolute sense, but between two dominant directions of response.</p>
      <sec id="sec3-1">
        <title>Effects of ions on electronics: the iontronic direction</title>
        <p>Ion motion, insertion, redistribution or ion-associated polarization can change carrier density, Fermi level, barrier height, polarization, magnetization and electronic conductivity. Oxygen-ion or vacancy motion can reconstruct an electronic conduction path in memristive systems<sup>[<xref ref-type="bibr" rid="B8">8</xref>]</sup>, electrolyte-based ionic control can tune functional oxides<sup>[<xref ref-type="bibr" rid="B9">9</xref>]</sup>, magnetoionics uses ionic redistribution to tune magnetic states<sup>[<xref ref-type="bibr" rid="B10">10</xref>,<xref ref-type="bibr" rid="B11">11</xref>]</sup>, and ionic accumulation or insertion changes the electronic carrier population in organic electrochemical transistors<sup>[<xref ref-type="bibr" rid="B12">12</xref>]</sup>.</p>
        <p>Piezotronics offers a particularly instructive case because its coupling mechanism is direct. In the framework established by Wang and co-workers, applying strain to a non-centrosymmetric piezoelectric semiconductor creates an internal piezopotential through ionic polarization. Because the material is simultaneously piezoelectric and semiconducting, this piezopotential acts as a gate on carrier transport across an interface or junction. Modulation of electronic barriers and current by this strain-induced piezopotential defines the piezotronic effect<sup>[<xref ref-type="bibr" rid="B13">13</xref>-<xref ref-type="bibr" rid="B16">16</xref>]</sup>.</p>
      </sec>
      <sec id="sec3-2">
        <title>Effects of electrons on ionics: semiconductor-ionics</title>
        <p>The opposite direction is Semiconductor-Ionics: electronic structure and internal fields alter ionic states or ionic transport. Band bending, heterojunction fields, carrier-defect coupling, interfacial polarization and charge-state-dependent defect formation are possible routes<sup>[<xref ref-type="bibr" rid="B4">4</xref>]</sup>. The distinction from a conventional mixed conductor is therefore physical as well as operational: mixed conduction identifies simultaneous electronic and ionic transport, whereas Semiconductor-Ionics requires semiconductor-state physics to become functionally active in regulating ionic behavior.</p>
        <p>The proposed Dieionics, Ferroionics, Piezoionics and Topoionics denote mechanism-defined ionic functionalities rather than claims that all are equally deduced as independent disciplines rooted from the electron-ion coupling physics. Their purpose is to create testable questions: for example, a dieionic assignment should require dielectric polarization or an associated local field to change an ionic observable, while a piezoionic assignment should require a strain/polarization perturbation to change ionic accumulation, mobility or flux.</p>
        <p>The topological column requires special care. Topological electronic materials refer to topology of electronic states in reciprocal space. Ionically controlled topology describes cases in which ion insertion, migration or redox changes an electronic/topological state. Experiments demonstrate this route: Li intercalation drives topological domain-wall evolution in graphene-based structures<sup>[<xref ref-type="bibr" rid="B17">17</xref>]</sup>, ionic gating controls a topological 3Q state in Co<sub>x</sub>-TaS<sub>2</sub><sup>[<xref ref-type="bibr" rid="B18">18</xref>]</sup>, and Li intercalation changes Fermi-surface topology in 2H-TaSe<sub>2</sub><sup>[<xref ref-type="bibr" rid="B19">19</xref>]</sup>. By contrast, Topoionics refers to real-space ionic transport governed by material architecture, for example a core-shell structure with a highly ion-conducting surface layer and a relatively insulating core. Here, the topology, dimensionality and connectivity of ion-active regions or interfaces determine ionic transport.</p>
      </sec>
      <sec id="sec3-3">
        <title>One material can move between regimes</title>
        <p>The two directions are not mutually exclusive. Ion redistribution may alter an electronic potential, which then redirects subsequent ion motion. Which direction appears dominant can change with bias, temperature, atmosphere, strain, hydration, illumination or defect state. The classification is operational rather than unchangeable: it describes how a material functions under stated conditions.</p>
      </sec>
    </sec>
    <sec id="sec4">
      <title>GRADE OF COUPLING MECHANISMS</title>
      <p>Direction alone does not tell us how strongly the two subsystems are tied together. <xref ref-type="fig" rid="fig3">Figure 3</xref> adds this second dimension. The coupling grades should not be read as a rigid ladder of material quality; they are proposed operating regimes.</p>
      <p>Grade 0 contains state descriptors from which the coupled problem is built: band structure, density of states, semiconductor states and defect chemistry. Grade 1 is the approximately separable limit. Grade 2 covers weak and intermediate coupling, including mixed ion and electron conductor (MIEC), defect-carrier association and polaronic carrier-lattice coupling. Grade 3 is where a directional cross-response becomes the function. Grade 4 describes strong reciprocal or correlated dynamics, including proton-coupled electron transfer (PCET), correlated polarons, collective defect dynamics and tunneling-assisted transfer. Grade 5 is a prospective state-selective frontier.</p>
      <p>The coupling grades are intended as an operational guide not as a universal numerical scale. They are distinguished by whether electron-ion cross-effects are negligible, measurable, functionally dominant or strongly reciprocal under a given operating condition.</p>
      <p><xref ref-type="fig" rid="fig3">Figure 3</xref> proposes the grades of electron-ion coupling. <xref ref-type="table" rid="t2">Table 2</xref> further specifies the operational criteria used in <xref ref-type="fig" rid="fig3">Figure 3</xref>. The right side of <xref ref-type="fig" rid="fig3">Figure 3</xref> uses R(E), a state-admission function describing the relative contribution of ionic states at energy E to transport, to illustrate how ionic transport may become increasingly state-selective. A broad R(E) represents transport involving many accessible states, whereas a narrower R(E) indicates that fewer states contribute effectively. At the prospective resonant limit, transport is dominated by strongly matched states. Here, R(E) is used schematically rather than as a numerical measure of the electron-ion coupling grade; its relation to the state-resonant energy transmission law (SRETL) framework is discussed further in Section <bold>PERSPECTIVE</bold><sup>[<xref ref-type="bibr" rid="B20">20</xref>]</sup>.</p>
      <table-wrap id="t2">
          <label>Table 2</label>
          <caption>
            <p>Operational criteria for the proposed coupling grades</p>
          </caption>
          <table frame="hsides" rules="groups">
            <thead>
              <tr>
                <td style="border-bottom:1;">
                  <bold>Grade</bold>
                </td>
                <td style="border-bottom:1;">
                  <bold>Operational criterion</bold>
                </td>
                <td style="border-bottom:1;">
                  <bold>Suggested measurables</bold>
                </td>
                <td style="border-bottom:1;">
                  <bold>Representative interpretation</bold>
                </td>
                <td style="border-bottom:1;">
                  <bold>Ref.</bold>
                </td>
              </tr>
            </thead>
            <tbody>
              <tr>
                <td>Grade 0</td>
                <td>State descriptors only; no coupling assignment</td>
                <td>Band structure, DOS, defect chemistry, ionic occupancy</td>
                <td>Available electronic and ionic states</td>
                <td>[<xref ref-type="bibr" rid="B1">1</xref>,<xref ref-type="bibr" rid="B2">2</xref>,<xref ref-type="bibr" rid="B4">4</xref>]</td>
              </tr>
              <tr>
                <td>Grade 1</td>
                <td>Electronic and ionic behaviors are approximately independent for the function considered</td>
                <td>Electronic or ionic conductivity, activation energy, carrier concentration</td>
                <td>Classical electronics / solid electrolytes</td>
                <td>[<xref ref-type="bibr" rid="B1">1</xref>,<xref ref-type="bibr" rid="B2">2</xref>,<xref ref-type="bibr" rid="B5">5</xref>]</td>
              </tr>
              <tr>
                <td>Grade 2</td>
                <td>Electron-ion interaction is measurable but remains secondary to the main function</td>
                <td>Changes in conductivity, defect population, carrier density, polarization, mixed-conduction behavior</td>
                <td>MIEC defect-carrier or polaronic coupling</td>
                <td>[<xref ref-type="bibr" rid="B5">5</xref>-<xref ref-type="bibr" rid="B7">7</xref>]</td>
              </tr>
              <tr>
                <td>Grade 3</td>
                <td>One subsystem clearly controls the functional response of the other</td>
                <td>Ion-effect on electronic current, barrier, magnetization; or electronic-state/field-effect on ionic conductivity or flux</td>
                <td>Iontronics / Semiconductor-Ionics</td>
                <td>[<xref ref-type="bibr" rid="B3">3</xref>,<xref ref-type="bibr" rid="B4">4</xref>,<xref ref-type="bibr" rid="B8">8</xref>-<xref ref-type="bibr" rid="B16">16</xref>]</td>
              </tr>
              <tr>
                <td>Grade 4</td>
                <td>Electronic, ionic and lattice responses become strongly interdependent and cannot be treated independently</td>
                <td>Reciprocal response, hysteresis, coupled time scales, operando spectroscopy/microscopy</td>
                <td>PCET, correlated polarons, collective defect dynamics</td>
                <td>[<xref ref-type="bibr" rid="B4">4</xref>,<xref ref-type="bibr" rid="B7">7</xref>,<xref ref-type="bibr" rid="B20">20</xref>]</td>
              </tr>
              <tr>
                <td>Grade 5</td>
                <td>Transport becomes state-selective or resonant beyond conventional barrier-lowering descriptions</td>
                <td>Isotope effects, thermal-to-quantum crossover, frequency-selective resonance, state matching, coherence-sensitive evidence if claimed</td>
                <td>State-selective transport / prospective quantum ionics</td>
                <td>[<xref ref-type="bibr" rid="B21">21</xref>-<xref ref-type="bibr" rid="B26">26</xref>]</td>
              </tr>
            </tbody>
          </table>
          <table-wrap-foot>
            <fn>
              <p>These are representative support references, not claims that every paper establishes the whole grade. DOS: Density of states; PCET: proton-coupled electron transfer.</p>
            </fn>
          </table-wrap-foot>
        </table-wrap>
    </sec>
    <sec id="sec5">
      <title>FROM CLASSIFICATION TO COUPLING ENGINEERING</title>
      <p>A useful classification should suggest what to do next. In this sense, the coupling map is also a design map. Interfaces bring band alignment, space charge and defect segregation into one region. Polarization changes both electronic band bending and ionic chemical potential. Strain alters orbital overlap, lattice vibration and migration geometry. Electronic-state engineering changes defect charge states and formation energies<sup>[<xref ref-type="bibr" rid="B4">4</xref>,<xref ref-type="bibr" rid="B8">8</xref>,<xref ref-type="bibr" rid="B9">9</xref>]</sup>.</p>
      <p>Interfaces bring band alignment, space charge and defect segregation into one region. Polarization changes both electronic band bending and ionic chemical potential. Strain alters orbital overlap, lattice vibration and migration geometry. Electronic-state engineering changes defect charge states and formation energies.</p>
      <p>These strategies are usually discussed separately. Electron-ion coupling gives them a common design language: structure - coupling- transport mechanism - function. The practical question is no longer only whether a barrier can be lowered or carrier concentration increased, but whether a chosen defect, interface or field creates the cross-response needed for the intended function.</p>
      <sec id="sec5-1">
        <title>Regime switching, kinetics and service stability</title>
        <p>The same material can move between regimes as the operating conditions change. Electric-field-driven proton evolution in SrRuO<sub>3</sub> reversibly changes magnetic state<sup>[<xref ref-type="bibr" rid="B27">27</xref>]</sup>; nanoscale hydrogenation/dehydrogenation reversibly switches VO<sub>2</sub><sup>[<xref ref-type="bibr" rid="B28">28</xref>]</sup>; and Li intercalation in ferroelectric alpha-In<sub>2</sub>Se<sub>3</sub> produces successive electronic and structural regimes<sup>[<xref ref-type="bibr" rid="B29">29</xref>]</sup>. Regime assignment should therefore specify temperature, bias, ion chemical potential and time rather than composition alone.</p>
        <p>More broadly, recent analysis of MnCo<sub>2</sub>O<sub>4</sub>-based electrochemical materials illustrates how compositional, structural and device-level engineering can reshape electrochemical behavior and functionality<sup>[<xref ref-type="bibr" rid="B30">30</xref>]</sup>. <xref ref-type="table" rid="t3">Table 3</xref> further maps representative literature examples onto the proposed coupling framework.</p>
       <table-wrap id="t3">
        <label>Table 3</label>
        <caption>
          <p>Representative experiments mapped onto the coupling framework</p>
        </caption>
        <table frame="hsides" rules="groups">
          <thead>
            <tr>
              <td style="border-bottom:1;">
                <bold>System</bold>
              </td>
              <td style="border-bottom:1;">
                <bold>Perturbation</bold>
              </td>
              <td style="border-bottom:1;">
                <bold>Measured response</bold>
              </td>
              <td style="border-bottom:1;">
                <bold>Coupling grade / interpretation</bold>
              </td>
              <td style="border-bottom:1;">
                <bold>Ref.</bold>
              </td>
            </tr>
          </thead>
          <tbody>
            <tr>
              <td>OMIEC/OECT</td>
              <td>Electrochemical doping</td>
              <td>Electronic current changes with ionic uptake/redistribution</td>
              <td>Grade 2<bold>-</bold>3: mixed conduction to ion-controlled electronic function</td>
              <td>[<xref ref-type="bibr" rid="B6">6</xref>,<xref ref-type="bibr" rid="B12">12</xref>]</td>
            </tr>
            <tr>
              <td>ZnO piezotronics</td>
              <td>Mechanical strain</td>
              <td>Piezopotential changes interface barrier/current</td>
              <td>Grade 3: ionic/lattice displacement controls electronic function</td>
              <td>[<xref ref-type="bibr" rid="B13">13</xref>-<xref ref-type="bibr" rid="B16">16</xref>]</td>
            </tr>
            <tr>
              <td>Magnetoionic interface</td>
              <td>Ion migration</td>
              <td>Magnetization or magnetic anisotropy changes</td>
              <td>Grade 3: ions control magnetic/electronic function</td>
              <td>[<xref ref-type="bibr" rid="B10">10</xref>,<xref ref-type="bibr" rid="B11">11</xref>]</td>
            </tr>
            <tr>
              <td>SrRuO<sub>3</sub></td>
              <td>Electric-field-controlled protonation</td>
              <td>Reversible magnetic/electronic-state change</td>
              <td>Grade 3<bold>-</bold>4: reversible ion-controlled state switching</td>
              <td>[<xref ref-type="bibr" rid="B27">27</xref>]</td>
            </tr>
            <tr>
              <td>VO<sub>2</sub></td>
              <td>Hydrogenation/dehydrogenation</td>
              <td>Reversible insulator-metal transition</td>
              <td>Grade 3<bold>-</bold>4: reversible ion-controlled electronic switching</td>
              <td>[<xref ref-type="bibr" rid="B28">28</xref>]</td>
            </tr>
            <tr>
              <td>Cu<sub>7</sub>PS<sub>6</sub></td>
              <td>Temperature / phonon activation</td>
              <td>Collective Cu-ion hopping</td>
              <td>Grade 4: correlated ionic dynamics</td>
              <td>[<xref ref-type="bibr" rid="B20">20</xref>]</td>
            </tr>
            <tr>
              <td>Pd-H</td>
              <td>Temperature/isotope / H content</td>
              <td>Resonant proton tunneling</td>
              <td>Grade 5: resonant quantum proton transport</td>
              <td>[<xref ref-type="bibr" rid="B21">21</xref>]</td>
            </tr>
            <tr>
              <td>BZY ceramic</td>
              <td>Narrow-band MIR excitation</td>
              <td>Frequency-selective proton-conductivity enhancement</td>
              <td>Grade 5: state-selective proton transport</td>
              <td>[<xref ref-type="bibr" rid="B22">22</xref>]</td>
            </tr>
          </tbody>
        </table>
        <table-wrap-foot>
          <fn>
            <p>OMIEC: Organic mixed ionic-electronic conductor; OECT: organic electrochemical transistor: BZY: Y-doped barium zirconate; MIR: mid-infrared.</p>
          </fn>
        </table-wrap-foot>
      </table-wrap>
        <p>Switching also involves different response times and degrees of reversibility. Electronic changes are usually faster, while ionic redistribution, defect migration and structural relaxation can occur more slowly. Useful observations therefore include response time, hysteresis, retention and cycling stability. A stable coupling state should give a reproducible response during repeated operation, whereas irreversible redox, phase separation or defect accumulation will gradually change the material behavior.</p>
      </sec>
    </sec>
    <sec id="sec6">
      <title>PERSPECTIVE: DIMENSIONALITY AND THE STATE-SELECTIVE FRONTIER</title>
      <p>Dimensionality changes the balance of coupling channels. Core-shell or 0D particles emphasize surfaces and interfaces; 1D channels emphasize confinement and anisotropy; 2D materials combine short intercalation distances with reduced screening; and 3D solids emphasize percolating defect networks and bulk chemistry. Recent discussions of 2D nanofluidics and nanoconfined iontronics illustrate how confinement amplifies interfacial control<sup>[<xref ref-type="bibr" rid="B3">3</xref>,<xref ref-type="bibr" rid="B31">31</xref>]</sup>.</p>
      <p>Grade 5 should be read as an evidence ladder rather than a single established class. Resonant proton tunneling in Pd shows isotope dependence, a thermal-to-quantum crossover and state matching<sup>[<xref ref-type="bibr" rid="B21">21</xref>]</sup>. Narrow-band mid-infrared excitation of proton-conducting BaZrO<sub>3</sub>-based ceramics gives a reversible, frequency-selective conductivity enhancement<sup>[<xref ref-type="bibr" rid="B22">22</xref>]</sup>. Phonon-activated collective Cu hopping in Cu<sub>7</sub>PS<sub>6</sub> has been directly resolved<sup>[<xref ref-type="bibr" rid="B20">20</xref>]</sup>, but collective motion alone does not prove coherence. Sezen <italic>et al.</italic> reported coherent wave-like ionic transport under resonant excitation<sup>[<xref ref-type="bibr" rid="B23">23</xref>]</sup>. These observations motivate, but do not yet establish, a universal quantum-ionics regime.</p>
      <p>Accordingly, ‘quantum ionics’ should be used only when evidence goes beyond strong coupling. Relevant criteria include isotope-sensitive tunneling, a thermal-to-quantum crossover, frequency-selective resonance or discrete state matching, and - where coherence is claimed - a phase-sensitive or directly time/space-resolved coherent signal. Joule heating, photothermal effects and conventional electrochemical redistribution must be independently excluded. The SRETL provides one possible state-admission language for organizing such observations<sup>[<xref ref-type="bibr" rid="B20">20</xref>]</sup>, but the classification itself does not depend on SRETL.</p>
    </sec>
    <sec id="sec7">
      <title>CONCLUSION AND EXPERIMENTAL VALIDATION</title>
      <p>The classical classification of electronic materials remains the foundation of functional materials science, but it is no longer a complete description of materials in which electronic and ionic degrees of freedom regulate one another. The proposed framework adds a measurable question: how strongly and in which direction do the two subsystems interact under operating conditions?</p>
      <p>A practical validation workflow is straightforward: identify the relevant ionic and electronic variables, perturb one subsystem while monitoring the response of the other, and repeat the measurements across temperature, bias, frequency, atmosphere and time to establish reproducibility, kinetics and reversibility. Where strong reciprocal coupling or state-selective behaviour is suspected, spectroscopy, microscopy, isotope substitution or other state-sensitive probes can be used to identify the underlying mechanism. Materials screening should therefore focus not only on high ionic or electronic conductivity, but also on the strength, direction and stability of electron-ion coupling.</p>
      <p>The framework should be considered predictive only when an assigned coupling regime anticipates a measurable response under a new perturbation or operating condition. Framed this way, Iontronics and Semiconductor-Ionics become reciprocal functional directions, MIECs become one possible intermediate regime rather than the endpoint, and defects, interfaces, polarization, strain, topology and dimensionality become variables for coupling engineering.</p>
    </sec>
  </body>
  <back>
    <sec>
      <title>DECLARATIONS</title>
      <sec>
        <title>Authors’ contributions</title>
        <p>The author contributed solely to the article.</p>
      </sec>
      <sec>
        <title>Availability of data and materials</title>
        <p>Not applicable.</p>
      </sec>
      <sec>
        <title>AI and AI-assisted tools statement</title>
        <p>During the preparation of this manuscript, OpenAI ChatGPT (GPT-5.6 Sol; version 5.6, released 2026-07-09) was used solely for language editing. OpenAI ChatGPT (GPT-5.6 Luna; version 5.6, released 2026-07-09) was used to help draw <xref ref-type="fig" rid="fig1">Figures 1</xref>-<xref ref-type="fig" rid="fig3">3</xref> components in the manuscript. The tool did not influence the study design, data collection, analysis, interpretation, or the scientific content of the work. The author takes full responsibility for the accuracy, integrity, and final content of the manuscript.</p>
      </sec>
      <sec>
        <title>Financial support and sponsorship</title>
        <p>None.</p>
      </sec>
      <sec>
        <title>Conflicts of interest</title>
        <p>The author declares no conflicts of interest.</p>
      </sec>
      <sec>
        <title>Ethical approval and consent to participate</title>
        <p>Not applicable.</p>
      </sec>
      <sec>
        <title>Consent for publication</title>
        <p>Not applicable.</p>
      </sec>
      <sec>
        <title>Copyright</title>
        <p>© The Author(s) 2026.</p>
      </sec>
    </sec>
    <ref-list>
      <ref id="B1">
        <label>1</label>
        <nlm-citation publication-type="web">
          <person-group person-group-type="author">
            <name>
              <surname>Ashcroft</surname>
              <given-names>NW</given-names>
            </name>
            <name>
              <surname>Mermin</surname>
              <given-names>ND</given-names>
            </name>
          </person-group>
          <comment>Solid State Physics. New York: Holt, Rinehart and Winston; 1976. <uri xlink:href="https://books.google.com/books?id=o4w6AQAAIAAJ">https://books.google.com/books?id=o4w6AQAAIAAJ</uri></comment>
        </nlm-citation>
      </ref>
      <ref id="B2">
        <label>2</label>
        <nlm-citation publication-type="web">
          <person-group person-group-type="author">
            <name>
              <surname>Sze</surname>
              <given-names>SM</given-names>
            </name>
            <name>
              <surname>Li</surname>
              <given-names>Y</given-names>
            </name>
            <name>
              <surname>Ng</surname>
              <given-names>KK</given-names>
            </name>
          </person-group>
          <comment>Physics of Semiconductor Devices. 4th ed. Hoboken: Wiley; 2021. <uri xlink:href="https://www.wiley.com/en-us/Physics+of+Semiconductor+Devices%2C+4th+Edition-p-9781119429111">https://www.wiley.com/en-us/Physics+of+Semiconductor+Devices%2C+4th+Edition-p-9781119429111</uri></comment>
        </nlm-citation>
      </ref>
      <ref id="B3">
        <label>3</label>
        <nlm-citation publication-type="journal">
          <person-group person-group-type="author">
            <name>
              <surname>Liu</surname>
              <given-names>Y</given-names>
            </name>
            <name>
              <surname>Peng</surname>
              <given-names>P</given-names>
            </name>
            <name>
              <surname>Qian</surname>
              <given-names>H</given-names>
            </name>
            <name>
              <surname>Wang</surname>
              <given-names>ZL</given-names>
            </name>
            <name>
              <surname>Wei</surname>
              <given-names>D</given-names>
            </name>
          </person-group>
          <article-title>Nanoconfined iontronics and its electronic applications</article-title>
          <source>Nano Res Energy</source>
          <year>2025</year>
          <volume>4</volume>
          <fpage>e9120156</fpage>
          <pub-id pub-id-type="doi">10.26599/nre.2025.9120156</pub-id>
        </nlm-citation>
      </ref>
      <ref id="B4">
        <label>4</label>
        <nlm-citation publication-type="journal">
          <person-group person-group-type="author">
            <name>
              <surname>Bibi</surname>
              <given-names>B</given-names>
            </name>
            <name>
              <surname>Nazar</surname>
              <given-names>A</given-names>
            </name>
            <name>
              <surname>Zhu</surname>
              <given-names>B</given-names>
            </name>
            <etal />
          </person-group>
          <article-title>Emerging semiconductor ionic materials tailored by mixed ionic-electronic conductors for advanced fuel cells</article-title>
          <source>Adv Powder Mater</source>
          <year>2024</year>
          <volume>3</volume>
          <fpage>100231</fpage>
          <pub-id pub-id-type="doi">10.1016/j.apmate.2024.100231</pub-id>
        </nlm-citation>
      </ref>
      <ref id="B5">
        <label>5</label>
        <nlm-citation publication-type="journal">
          <person-group person-group-type="author">
            <name>
              <surname>Riess</surname>
              <given-names>I</given-names>
            </name>
          </person-group>
          <article-title>The possible use of mixed ionic electronic conductors instead of electrolytes in fuel cells</article-title>
          <source>Solid State Ion</source>
          <year>1992</year>
          <volume>52</volume>
          <fpage>127</fpage>
          <lpage>34</lpage>
          <pub-id pub-id-type="doi">10.1016/0167-2738(92)90098-a</pub-id>
        </nlm-citation>
      </ref>
      <ref id="B6">
        <label>6</label>
        <nlm-citation publication-type="journal">
          <person-group person-group-type="author">
            <name>
              <surname>Paulsen</surname>
              <given-names>BD</given-names>
            </name>
            <name>
              <surname>Tybrandt</surname>
              <given-names>K</given-names>
            </name>
            <name>
              <surname>Stavrinidou</surname>
              <given-names>E</given-names>
            </name>
            <name>
              <surname>Rivnay</surname>
              <given-names>J</given-names>
            </name>
          </person-group>
          <article-title>Organic mixed ionic-electronic conductors</article-title>
          <source>Nat Mater</source>
          <year>2020</year>
          <volume>19</volume>
          <fpage>13</fpage>
          <lpage>26</lpage>
          <pub-id pub-id-type="doi">10.1038/s41563-019-0435-z</pub-id>
          <pub-id pub-id-type="pmid">31427743</pub-id>
        </nlm-citation>
      </ref>
      <ref id="B7">
        <label>7</label>
        <nlm-citation publication-type="journal">
          <person-group person-group-type="author">
            <name>
              <surname>Keene</surname>
              <given-names>ST</given-names>
            </name>
            <name>
              <surname>Rao</surname>
              <given-names>A</given-names>
            </name>
            <name>
              <surname>Malliaras</surname>
              <given-names>GG</given-names>
            </name>
          </person-group>
          <article-title>The relationship between ionic-electronic coupling and transport in organic mixed conductors</article-title>
          <source>Sci Adv</source>
          <year>2023</year>
          <volume>9</volume>
          <fpage>eadi3536</fpage>
          <pub-id pub-id-type="doi">10.1126/sciadv.adi3536</pub-id>
          <pub-id pub-id-type="pmid">37647402</pub-id>
          <pub-id pub-id-type="pmcid">PMC10468126</pub-id>
        </nlm-citation>
      </ref>
      <ref id="B8">
        <label>8</label>
        <nlm-citation publication-type="journal">
          <person-group person-group-type="author">
            <name>
              <surname>Yang</surname>
              <given-names>Y</given-names>
            </name>
            <name>
              <surname>Zhang</surname>
              <given-names>X</given-names>
            </name>
            <name>
              <surname>Qin</surname>
              <given-names>L</given-names>
            </name>
            <name>
              <surname>Zeng</surname>
              <given-names>Q</given-names>
            </name>
            <name>
              <surname>Qiu</surname>
              <given-names>X</given-names>
            </name>
            <name>
              <surname>Huang</surname>
              <given-names>R</given-names>
            </name>
          </person-group>
          <article-title>Probing nanoscale oxygen ion motion in memristive systems</article-title>
          <source>Nat Commun</source>
          <year>2017</year>
          <volume>8</volume>
          <fpage>15173</fpage>
          <pub-id pub-id-type="doi">10.1038/ncomms15173</pub-id>
          <pub-id pub-id-type="pmid">28469257</pub-id>
          <pub-id pub-id-type="pmcid">PMC5418605</pub-id>
        </nlm-citation>
      </ref>
      <ref id="B9">
        <label>9</label>
        <nlm-citation publication-type="journal">
          <person-group person-group-type="author">
            <name>
              <surname>Leighton</surname>
              <given-names>C</given-names>
            </name>
          </person-group>
          <article-title>Electrolyte-based ionic control of functional oxides</article-title>
          <source>Nat Mater</source>
          <year>2019</year>
          <volume>18</volume>
          <fpage>13</fpage>
          <lpage>8</lpage>
          <pub-id pub-id-type="doi">10.1038/s41563-018-0246-7</pub-id>
          <pub-id pub-id-type="pmid">30542099</pub-id>
        </nlm-citation>
      </ref>
      <ref id="B10">
        <label>10</label>
        <nlm-citation publication-type="journal">
          <person-group person-group-type="author">
            <name>
              <surname>Bauer</surname>
              <given-names>U</given-names>
            </name>
            <name>
              <surname>Yao</surname>
              <given-names>L</given-names>
            </name>
            <name>
              <surname>Tan</surname>
              <given-names>AJ</given-names>
            </name>
            <etal />
          </person-group>
          <article-title>Magneto-ionic control of interfacial magnetism</article-title>
          <source>Nat Mater</source>
          <year>2015</year>
          <volume>14</volume>
          <fpage>174</fpage>
          <lpage>81</lpage>
          <pub-id pub-id-type="doi">10.1038/nmat4134</pub-id>
        </nlm-citation>
      </ref>
      <ref id="B11">
        <label>11</label>
        <nlm-citation publication-type="journal">
          <person-group person-group-type="author">
            <name>
              <surname>Nichterwitz</surname>
              <given-names>M</given-names>
            </name>
            <name>
              <surname>Honnali</surname>
              <given-names>S</given-names>
            </name>
            <name>
              <surname>Kutuzau</surname>
              <given-names>M</given-names>
            </name>
            <etal />
          </person-group>
          <article-title>Advances in magneto-ionic materials and perspectives for their application</article-title>
          <source>APL Mater</source>
          <year>2021</year>
          <volume>9</volume>
          <fpage>030903</fpage>
          <pub-id pub-id-type="doi">10.1063/5.0042544</pub-id>
        </nlm-citation>
      </ref>
      <ref id="B12">
        <label>12</label>
        <nlm-citation publication-type="journal">
          <person-group person-group-type="author">
            <name>
              <surname>Rivnay</surname>
              <given-names>J</given-names>
            </name>
            <name>
              <surname>Inal</surname>
              <given-names>S</given-names>
            </name>
            <name>
              <surname>Salleo</surname>
              <given-names>A</given-names>
            </name>
            <name>
              <surname>Owens</surname>
              <given-names>RM</given-names>
            </name>
            <name>
              <surname>Berggren</surname>
              <given-names>M</given-names>
            </name>
            <name>
              <surname>Malliaras</surname>
              <given-names>GG</given-names>
            </name>
          </person-group>
          <article-title>Organic electrochemical transistors</article-title>
          <source>Nat Rev Mater</source>
          <year>2018</year>
          <volume>3</volume>
          <fpage>BFnatrevmats201786</fpage>
          <pub-id pub-id-type="doi">10.1038/natrevmats.2017.86</pub-id>
        </nlm-citation>
      </ref>
      <ref id="B13">
        <label>13</label>
        <nlm-citation publication-type="journal">
          <person-group person-group-type="author">
            <name>
              <surname>Wang</surname>
              <given-names>X</given-names>
            </name>
            <name>
              <surname>Zhou</surname>
              <given-names>J</given-names>
            </name>
            <name>
              <surname>Song</surname>
              <given-names>J</given-names>
            </name>
            <name>
              <surname>Liu</surname>
              <given-names>J</given-names>
            </name>
            <name>
              <surname>Xu</surname>
              <given-names>N</given-names>
            </name>
            <name>
              <surname>Wang</surname>
              <given-names>ZL</given-names>
            </name>
          </person-group>
          <article-title>Piezoelectric field effect transistor and nanoforce sensor based on a single ZnO nanowire</article-title>
          <source>Nano Lett</source>
          <year>2006</year>
          <volume>6</volume>
          <fpage>2768</fpage>
          <lpage>72</lpage>
          <pub-id pub-id-type="doi">10.1021/nl061802g</pub-id>
        </nlm-citation>
      </ref>
      <ref id="B14">
        <label>14</label>
        <nlm-citation publication-type="journal">
          <person-group person-group-type="author">
            <name>
              <surname>Wang</surname>
              <given-names>Z</given-names>
            </name>
          </person-group>
          <article-title>Nanopiezotronics</article-title>
          <source>Adv Mater</source>
          <year>2007</year>
          <volume>19</volume>
          <fpage>889</fpage>
          <lpage>92</lpage>
          <pub-id pub-id-type="doi">10.1002/adma.200602918</pub-id>
        </nlm-citation>
      </ref>
      <ref id="B15">
        <label>15</label>
        <nlm-citation publication-type="journal">
          <person-group person-group-type="author">
            <name>
              <surname>Wang</surname>
              <given-names>ZL</given-names>
            </name>
          </person-group>
          <article-title>Progress in piezotronics and piezo-phototronics</article-title>
          <source>Adv Mater</source>
          <year>2012</year>
          <volume>24</volume>
          <fpage>4632</fpage>
          <lpage>46</lpage>
          <pub-id pub-id-type="doi">10.1002/adma.201104365</pub-id>
          <pub-id pub-id-type="pmid">22331639</pub-id>
        </nlm-citation>
      </ref>
      <ref id="B16">
        <label>16</label>
        <nlm-citation publication-type="journal">
          <person-group person-group-type="author">
            <name>
              <surname>Wang</surname>
              <given-names>ZL</given-names>
            </name>
            <name>
              <surname>Wu</surname>
              <given-names>W</given-names>
            </name>
            <name>
              <surname>Falconi</surname>
              <given-names>C</given-names>
            </name>
          </person-group>
          <article-title>Piezotronics and piezo-phototronics with third-generation semiconductors</article-title>
          <source>MRS Bull</source>
          <year>2018</year>
          <volume>43</volume>
          <fpage>922</fpage>
          <lpage>7</lpage>
          <pub-id pub-id-type="doi">10.1557/mrs.2018.263</pub-id>
        </nlm-citation>
      </ref>
      <ref id="B17">
        <label>17</label>
        <nlm-citation publication-type="journal">
          <person-group person-group-type="author">
            <name>
              <surname>Endo</surname>
              <given-names>Y</given-names>
            </name>
            <name>
              <surname>Yan</surname>
              <given-names>X</given-names>
            </name>
            <name>
              <surname>Li</surname>
              <given-names>M</given-names>
            </name>
            <etal />
          </person-group>
          <article-title>Dynamic topological domain walls driven by lithium intercalation in graphene</article-title>
          <source>Nat Nanotechnol</source>
          <year>2023</year>
          <volume>18</volume>
          <fpage>1154</fpage>
          <lpage>61</lpage>
          <pub-id pub-id-type="doi">10.1038/s41565-023-01463-7</pub-id>
        </nlm-citation>
      </ref>
      <ref id="B18">
        <label>18</label>
        <nlm-citation publication-type="journal">
          <person-group person-group-type="author">
            <name>
              <surname>Kim</surname>
              <given-names>J</given-names>
            </name>
            <name>
              <surname>Zhang</surname>
              <given-names>KX</given-names>
            </name>
            <name>
              <surname>Park</surname>
              <given-names>P</given-names>
            </name>
            <etal />
          </person-group>
          <article-title>Electrical control of topological 3Q state in intercalated van der Waals antiferromagnet Co<sub>x</sub>-TaS<sub>2</sub></article-title>
          <source>Nat Commun</source>
          <year>2025</year>
          <volume>16</volume>
          <fpage>8943</fpage>
          <pub-id pub-id-type="doi">10.1038/s41467-025-63991-1</pub-id>
          <pub-id pub-id-type="pmid">41062517</pub-id>
          <pub-id pub-id-type="pmcid">PMC12508151</pub-id>
        </nlm-citation>
      </ref>
      <ref id="B19">
        <label>19</label>
        <nlm-citation publication-type="journal">
          <person-group person-group-type="author">
            <name>
              <surname>Wu</surname>
              <given-names>Y</given-names>
            </name>
            <name>
              <surname>Xing</surname>
              <given-names>H</given-names>
            </name>
            <name>
              <surname>Lian</surname>
              <given-names>C</given-names>
            </name>
            <etal />
          </person-group>
          <article-title>Ion intercalation engineering of electronic properties of two-dimensional crystals of 2H-TaSe<sub>2</sub></article-title>
          <source>Phys Rev Mater</source>
          <year>2019</year>
          <volume>3</volume>
          <fpage>104003</fpage>
          <pub-id pub-id-type="doi">10.1103/physrevmaterials.3.104003</pub-id>
        </nlm-citation>
      </ref>
      <ref id="B20">
        <label>20</label>
        <nlm-citation publication-type="journal">
          <person-group person-group-type="author">
            <name>
              <surname>Lin</surname>
              <given-names>H</given-names>
            </name>
            <name>
              <surname>Gupta</surname>
              <given-names>MK</given-names>
            </name>
            <name>
              <surname>Ouyang</surname>
              <given-names>N</given-names>
            </name>
            <etal />
          </person-group>
          <article-title>Phonon-activated collective hopping in a superionic phase</article-title>
          <source>Phys Rev X</source>
          <year>2026</year>
          <volume>16</volume>
          <fpage>031046</fpage>
          <pub-id pub-id-type="doi">10.1103/lx5w-x6wl</pub-id>
        </nlm-citation>
      </ref>
      <ref id="B21">
        <label>21</label>
        <nlm-citation publication-type="journal">
          <person-group person-group-type="author">
            <name>
              <surname>Ozawa</surname>
              <given-names>T</given-names>
            </name>
            <name>
              <surname>Nakanishi</surname>
              <given-names>H</given-names>
            </name>
            <name>
              <surname>Kato</surname>
              <given-names>K</given-names>
            </name>
            <name>
              <surname>Shimizu</surname>
              <given-names>R</given-names>
            </name>
            <name>
              <surname>Hitosugi</surname>
              <given-names>T</given-names>
            </name>
            <name>
              <surname>Fukutani</surname>
              <given-names>K</given-names>
            </name>
          </person-group>
          <article-title>Observation of resonant tunneling of proton from octahedral to tetrahedral sites in Pd</article-title>
          <source>J Phys Chem Solids</source>
          <year>2024</year>
          <volume>185</volume>
          <fpage>111741</fpage>
          <pub-id pub-id-type="doi">10.1016/j.jpcs.2023.111741</pub-id>
        </nlm-citation>
      </ref>
      <ref id="B22">
        <label>22</label>
        <nlm-citation publication-type="journal">
          <person-group person-group-type="author">
            <name>
              <surname>Li</surname>
              <given-names>H</given-names>
            </name>
            <name>
              <surname>Zhu</surname>
              <given-names>Y</given-names>
            </name>
            <name>
              <surname>Zhao</surname>
              <given-names>Z</given-names>
            </name>
            <etal />
          </person-group>
          <article-title>Mid-infrared light resonance-enhanced proton conductivity in ceramics</article-title>
          <source>Nat Commun</source>
          <year>2025</year>
          <volume>16</volume>
          <fpage>7707</fpage>
          <pub-id pub-id-type="doi">10.1038/s41467-025-63027-8</pub-id>
          <pub-id pub-id-type="pmid">40830101</pub-id>
          <pub-id pub-id-type="pmcid">PMC12365247</pub-id>
        </nlm-citation>
      </ref>
      <ref id="B23">
        <label>23</label>
        <nlm-citation publication-type="journal">
          <person-group person-group-type="author">
            <name>
              <surname>Sezen</surname>
              <given-names>Y</given-names>
            </name>
            <name>
              <surname>Çiftçi</surname>
              <given-names>NO</given-names>
            </name>
            <name>
              <surname>Sarsıl</surname>
              <given-names>MA</given-names>
            </name>
            <name>
              <surname>Czelej</surname>
              <given-names>K</given-names>
            </name>
            <name>
              <surname>Ergen</surname>
              <given-names>O</given-names>
            </name>
          </person-group>
          <article-title>Quantum coherent Chladni-like resonance: programming ions as matter waves for subpicosecond conduction</article-title>
          <source>Proc Natl Acad Sci U S A</source>
          <year>2026</year>
          <volume>123</volume>
          <fpage>e2604081123</fpage>
          <pub-id pub-id-type="doi">10.1073/pnas.2604081123</pub-id>
          <pub-id pub-id-type="pmid">42228539</pub-id>
          <pub-id pub-id-type="pmcid">PMC13250563</pub-id>
        </nlm-citation>
      </ref>
      <ref id="B24">
        <label>24</label>
        <nlm-citation publication-type="journal">
          <person-group person-group-type="author">
            <name>
              <surname>Zhang</surname>
              <given-names>X</given-names>
            </name>
            <name>
              <surname>Antonietti</surname>
              <given-names>M</given-names>
            </name>
            <name>
              <surname>Jiang</surname>
              <given-names>L</given-names>
            </name>
          </person-group>
          <article-title>Bioinformation transformation: from ionics to quantum ionics</article-title>
          <source>Sci China Mater</source>
          <year>2020</year>
          <volume>63</volume>
          <fpage>167</fpage>
          <lpage>71</lpage>
          <pub-id pub-id-type="doi">10.1007/s40843-019-1208-9</pub-id>
        </nlm-citation>
      </ref>
      <ref id="B25">
        <label>25</label>
        <nlm-citation publication-type="journal">
          <person-group person-group-type="author">
            <name>
              <surname>Wang</surname>
              <given-names>Y</given-names>
            </name>
            <name>
              <surname>Hu</surname>
              <given-names>Y</given-names>
            </name>
            <name>
              <surname>Guo</surname>
              <given-names>JP</given-names>
            </name>
            <name>
              <surname>Gao</surname>
              <given-names>J</given-names>
            </name>
            <name>
              <surname>Song</surname>
              <given-names>B</given-names>
            </name>
            <name>
              <surname>Jiang</surname>
              <given-names>L</given-names>
            </name>
          </person-group>
          <article-title>A physical derivation of high-flux ion transport in biological channel via quantum ion coherence</article-title>
          <source>Nat Commun</source>
          <year>2024</year>
          <volume>15</volume>
          <fpage>7189</fpage>
          <pub-id pub-id-type="doi">10.1038/s41467-024-51045-x</pub-id>
          <pub-id pub-id-type="pmid">39168976</pub-id>
          <pub-id pub-id-type="pmcid">PMC11339410</pub-id>
        </nlm-citation>
      </ref>
      <ref id="B26">
        <label>26</label>
        <nlm-citation publication-type="journal">
          <person-group person-group-type="author">
            <name>
              <surname>Zhu</surname>
              <given-names>B</given-names>
            </name>
          </person-group>
          <article-title>A state-resonant energy transmission law for energy materials and beyond</article-title>
          <source>Energy Z</source>
          <year>2026</year>
          <volume>2</volume>
          <fpage>200001</fpage>
          <pub-id pub-id-type="doi">10.20517/energyz.2026.03</pub-id>
        </nlm-citation>
      </ref>
      <ref id="B27">
        <label>27</label>
        <nlm-citation publication-type="journal">
          <person-group person-group-type="author">
            <name>
              <surname>Li</surname>
              <given-names>Z</given-names>
            </name>
            <name>
              <surname>Shen</surname>
              <given-names>S</given-names>
            </name>
            <name>
              <surname>Tian</surname>
              <given-names>Z</given-names>
            </name>
            <etal />
          </person-group>
          <article-title>Reversible manipulation of the magnetic state in SrRuO<sub>3</sub> through electric-field controlled proton evolution</article-title>
          <source>Nat Commun</source>
          <year>2020</year>
          <volume>11</volume>
          <fpage>184</fpage>
          <pub-id pub-id-type="doi">10.1038/s41467-019-13999-1</pub-id>
          <pub-id pub-id-type="pmid">31924767</pub-id>
          <pub-id pub-id-type="pmcid">PMC6954193</pub-id>
        </nlm-citation>
      </ref>
      <ref id="B28">
        <label>28</label>
        <nlm-citation publication-type="journal">
          <person-group person-group-type="author">
            <name>
              <surname>Li</surname>
              <given-names>L</given-names>
            </name>
            <name>
              <surname>Wang</surname>
              <given-names>M</given-names>
            </name>
            <name>
              <surname>Zhou</surname>
              <given-names>Y</given-names>
            </name>
            <etal />
          </person-group>
          <article-title>Manipulating the insulator-metal transition through tip-induced hydrogenation</article-title>
          <source>Nat Mater</source>
          <year>2022</year>
          <volume>21</volume>
          <fpage>1246</fpage>
          <lpage>51</lpage>
          <pub-id pub-id-type="doi">10.1038/s41563-022-01373-4</pub-id>
        </nlm-citation>
      </ref>
      <ref id="B29">
        <label>29</label>
        <nlm-citation publication-type="journal">
          <person-group person-group-type="author">
            <name>
              <surname>He</surname>
              <given-names>X</given-names>
            </name>
            <name>
              <surname>Gong</surname>
              <given-names>Z</given-names>
            </name>
            <name>
              <surname>Wang</surname>
              <given-names>T</given-names>
            </name>
            <etal />
          </person-group>
          <article-title>Intercalation-induced phase transitions in ferroelectric α-In<sub>2</sub>Se<sub>3</sub></article-title>
          <source>Adv Sci (Weinh)</source>
          <year>2026</year>
          <volume>13</volume>
          <fpage>e13712</fpage>
          <pub-id pub-id-type="doi">10.1002/advs.202513712</pub-id>
          <pub-id pub-id-type="pmid">41387329</pub-id>
          <pub-id pub-id-type="pmcid">PMC12903984</pub-id>
        </nlm-citation>
      </ref>
      <ref id="B30">
        <label>30</label>
        <nlm-citation publication-type="journal">
          <person-group person-group-type="author">
            <name>
              <surname>Zhang</surname>
              <given-names>Y</given-names>
            </name>
            <name>
              <surname>Fan</surname>
              <given-names>Z</given-names>
            </name>
            <name>
              <surname>Huo</surname>
              <given-names>Q</given-names>
            </name>
            <name>
              <surname>Yin</surname>
              <given-names>R</given-names>
            </name>
            <name>
              <surname>Wei</surname>
              <given-names>Y</given-names>
            </name>
            <name>
              <surname>Gao</surname>
              <given-names>H</given-names>
            </name>
          </person-group>
          <article-title>MnCo<sub>2</sub>O<sub>4</sub>-based materials for supercapacitors: a full-chain analysis from synthesis to device integration</article-title>
          <source>Coord Chem Rev</source>
          <year>2026</year>
          <volume>566</volume>
          <fpage>218158</fpage>
          <pub-id pub-id-type="doi">10.1016/j.ccr.2026.218158</pub-id>
        </nlm-citation>
      </ref>
      <ref id="B31">
        <label>31</label>
        <nlm-citation publication-type="journal">
          <person-group person-group-type="author">
            <name>
              <surname>Cui</surname>
              <given-names>Y</given-names>
            </name>
            <name>
              <surname>Gao</surname>
              <given-names>L</given-names>
            </name>
            <name>
              <surname>Ying</surname>
              <given-names>C</given-names>
            </name>
            <name>
              <surname>Tian</surname>
              <given-names>J</given-names>
            </name>
            <name>
              <surname>Liu</surname>
              <given-names>Z</given-names>
            </name>
          </person-group>
          <article-title>Two-dimensional material-based nanofluidic devices and their applications</article-title>
          <source>ACS Nano</source>
          <year>2025</year>
          <volume>19</volume>
          <fpage>1911</fpage>
          <lpage>43</lpage>
          <pub-id pub-id-type="doi">10.1021/acsnano.4c12051</pub-id>
        </nlm-citation>
      </ref>
    </ref-list>
  </back>
</article>